Adjustable Pinnacle 344 Offset Wall Mount Hinge
- 0.90 KGS
- Calculated at Checkout
Catalogue Number: P1N344 (An adjustable close version of the offset hinge P1N044)
Glass Fabrication: Cut-Out Required in Glass, See Template in product images.
Includes: Gaskets, Screws, and Glass Fabrication Dimensions.
Backplate: Central back-plate, Wall to Glass Hinge.
Deduction: 8 mm (Deduction from glass width to allow hinge while still keeping the same coverage / width)
Two hinges: Up to 36 kg, with a max door width of 711 mm.
Three hinges: Up to 54 kg, with a max door width of 813 mm.
Glass Thickness: 8 mm to 12 mm Toughened Safety Glass.
Construction: Solid brass with all moving parts (pins and springs) in stainless steel.
Hinge Swings: 90 Degree in and 90 Degree Out at factory set position.
Closing Type: Self-Centring when within 15 Degree of closed position at factory set position.
Special Feature: Adjustable to any angle up to 90 Degree without having to take door down. Construction: Solid Brass Hinge Swings: 90 Degree in and 90 Degree out (at factory set position).
Adjustable Pinnacle Series Hinges take our popular Pinnacle Hinge to a new level. Adjustment to accommodate the desired angle (up to 90 Degree) is done after the door is installed. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-centre to the desired closed position. The door can swing 90 Degree inward and also 90 Degree outward (adjusting angle from factory set position will reduce 90 Degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 Degree inside the shower area, thus having the door close snugly against the jamb.