Geneva 245 Series 135 Degree Pony Wall Mount Hinge Chrome
- 0.90 KGS
- Calculated at Checkout
Catalog Number: GEN245CH
Self-Centering with Reversible 5 Degree Pivot Pin Custom Pivot Pin Available Many Standard Finishes 3 Year Warranty Pony Wall Mount for 135 Degree Application These Geneva Pony Wall Mount Series hinges can be used in place of the standard wall-to-glass hinges normally utilized when using wall mount hinges on a pony wall, and glass-to-glass hinges above them. The GEN280 model is for use with 180 Degree applications, while the GEN245 is for use with 135 Degree applications. Previously in this application the tile or marble had to be cut to allow the wall mount hinge to be recessed. That adjustment aligned the pivot points between both hinges to allow proper installation. Geneva Pony Wall Mount Hinges are modified with a shortened center block (containing only one centering spring) and a small back plate (with only two mounting holes). Each hinge has the same Reversible 5 Degree Pivot Pin as our standard Geneva Hinge. NOTE: For 135 Degree installations it is required that the face of the pony wall be at a 45 Degree angle to the wall, and a 90 Degree angle to the door plane. Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm). Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).
SPECIFICATIONS: Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass Special Features: Mounted to surface of tile or marble, as opposed to having to cut into wall to recess the back plate to vertically align pivot points. Construction: Solid Brass Hinge Swings: Approximately 90 Degree in and 90 Degree Out Closing Type: Self-Centering when within 15 Degree of closed position. Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions