Geneva 544 Series Wall Mount Offset Back Plate Hinge -Chrome

(No reviews yet) Write a Review
SKU:
GEN544CH
Weight:
0.90 KGS
Shipping:
Calculated at Checkout
On Sale
Now: £33.00
Was: £37.00

Description

Catalog Number: GEN544CH  

Finish: Chrome

 

Self-Centering with Reversible 5 Degree Pivot Pin Available in Several Beautiful Finishes

Three Year Warranty

5?Pre-Set Model (Factory Set for 5? Tighter Closure Into Shower Interior)

 

 

The  Geneva Series of professional Hinges is able to accommodate 5/16" (8 mm) to 1/2" (12 mm) glass. A variety of six styles gives design flexibility, including three different Wall Mount and three different Glass-to-Glass types. Geneva Hinges are self-centering and contain a Reversible 5?; Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off-angle" installations. Made of solid brass with all moving parts (pins and springs) in stainless steel. Each Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90?. The opposite side of the Pin is marked 85?. Standard Geneva Hinges come with the 90? side activated. Pre-Set Models come with the Pin pre-set for 85? (5? tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side. Custom Pivot Pin: Custom Pivot Pins (Cat. No. GENP1N) are available to accommodate "off-angle" installations. If the 5 Degree Reversible Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degrees). If using the Custom Pivot Pin, contact our Technical Sales Shower Door Department. Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin. Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm). Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).

 

SPECIFICATIONS: Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass Special Feature: Offers choice of Standard Model factory set at standard 0?; closing position, or 5? Pre-Set Model for tighter closure into shower interior. Construction: Solid Brass  Hinge Swings: 90? in and 90? Out Closing Type: Self-Centering when within 15? of Closed Position Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions

View AllClose