Junior Geneva 074 Series Wall Mount Short Back Plate Hinge -Brushed Nickel

(No reviews yet) Write a Review
SKU:
JRG074BN
Weight:
0.90 KGS
Shipping:
Calculated at Checkout
£44.99

Description

Catalog Number: JRG074BN
Finish: BRUSHED NICKEL

Wall Mount Short Back Plate Standard Model(Factory Set for Standard Closing Position)
Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
3 Year Warranty

The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer flexibility of application. Used to accommodate 1/4" (6 mm) to 5/16" (8 mm) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90 Degree, 135 Degree, and 180 Degree Glass-to-Glass styles. The Junior Geneva is self-centering and available in up to 12 stock finishes. They contain a Reversible Pivot Pin for optional 5 Degree tighter door closure.

STANDARD REVERSIBLE PIVOT PIN: Each Junior Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 Degree. The opposite side of the Pin is marked 85 Degree, which will allow the door to close 5 Degree further into the shower. The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 Degree. If the standard 5 Degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 Degree).

Using two hinges with 1/4" to 5/16" glass (6 to 8 mm) the hinge will hold up to 62 lbs. (28 kg) with a maximum door width of 28" (711 mm).

Using three hinges with 1/4" to 5/16" glass (6 to 8 mm) the hinge will hold up to 92 lbs. (42 kg) with a maximum width of 32" (813 mm).

SPECIFICATIONS:
Glass Thickness: 1/4" (6 mm) to 5/16" (8 mm) Tempered Safety Glass
Special Features: Most models offer a choice of Standard Model, factory set at standard closing position (0 Degree), or 5 Degree Pre-Set Model for tighter closure into shower interior. All models contain a Reversible 5 Degree Pivot Pin. When activated, it allows 5 Degree tighter door closure.
Construction: Solid Brass
Hinge Swings: 90 Degree In and 90 Degree Out
Closing Type: Self-Centering when within 15° of closed position.
Cut-Out Required
Includes: Gaskets, Screws, and Glass Fabrication Dimensions

View AllClose