Junior Geneva 574 Series Wall Mount Short Back Plate Hinge With 5 Degree Pin Preset
- 0.90 KGS
- Calculated at Checkout
Catalog Number: JRG574CH
5?; Pre-Set Model (Factory set for 5?; Tighter Closure Into Shower Interior)
Self-Centering with Reversible 5 Degree Pivot Pin
3 Year Warranty
The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer flexibility of application. Used to accommodate 1/4" (6 mm) to 5/16" (8 mm) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90?, 135?, and 180? Glass-to-Glass styles. The Junior Geneva is self-centering and available in up to 12 stock finishes. They contain a Reversible Pivot Pin for optional 5? tighter door closure.
STANDARD REVERSIBLE PIVOT PIN: Each Junior Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90?. The opposite side of the Pin is marked 85?, which will allow the door to close 5? further into the shower. The Pin can be rotated (not flipped upside down) to activate the other side.
CUSTOM PIVOT PIN Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90?. If the standard 5? Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45?). Using two hinges with 1/4" to 5/16" glass (6 to 8 mm) the hinge will hold up to 62 lbs. (28 kg) with a maximum door width of 28" (711 mm). Using three hinges with 1/4" to 5/16" glass (6 to 8 mm) the hinge will hold up to 92 lbs. (42 kg) with a maximum width of 32" (813 mm).
SPECIFICATIONS: Glass Thickness: 1/4" (6 mm) to 5/16" (8 mm) Tempered Safety Glass Special Features: Most models offer a choice of Standard Model, factory set at standard closing position (0?), or 5? Pre-Set Model for tighter closure into shower interior. All models contain a Reversible 5? Pivot Pin. When activated, it allows 5? tighter door closure. Construction: Solid Brass Hinge Swings: 90? In and 90? Out Closing Type: Self-Centering when within 15?; of closed position. Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions