Pinnacle 074 Series Wall Mount Short Back Plate Hinge
- 0.90 KGS
- Calculated at Checkout
Catalog Number: P1N074CH
Self-Centering with Reversible 5 Degree Pivot Pin
Available in Several Beautiful Finishes
Wall Mount Short Back Plate Standard Model(Factory Set for Standard Closing Position) The Pinnacle Hinge is similar to our popular Geneva Series Hinge, but with one design change: Pinnacle has radius corners and beveled edges for a sleek appearance. Pinnacle Hinges accommodate 5/16" (8 mm) to 1/2" (12 mm) thick tempered safety glass, and are self-centering when within 15§ of the closed position. Pinnacle Hinges are constructed of solid brass, and have stainless steel plunger tips, pins, and springs to ensure long service life and reliable door closure. The Pinnacle Hinge also contains the same Reversible 5§ Pivot Pin featured in our Geneva, Cathedral, Roman, Ultimate, and Elite Series Hinges. A Custom Pivot Pin is also available for "off-angle" installations.
STANDARD REVERSIBLE PIVOT PIN: Each Pinnacle Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90§. The opposite side of the Pin is marked 85§. Standard Pinnacle Hinges come with the 90§ side activated. Pre-Set Models come with the Pin pre-set for 85§ (5§ tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.
CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90§. If the standard 5§ Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45§). Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm). Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).
SPECIFICATIONS: Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass Special Feature: Wall Mount Hinges and 180§ Glass-to-Glass Hinge offer a choice of a Standard Model, factory set at standard closing position (0§), or a 5§ Pre-Set Model for tighter closure into shower interior. Construction: Solid Brass Hinge Swings: 90§ in and 90§ out Closing Type: Self-Centering when within 15§ of closed position Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions