Roman 537 Series Wall Mount Full Back Plate Standard Hinge with 5 Degree Offset - Chrome
- 0.90 KGS
- Calculated at Checkout
|Catalog Number: R0M537CH |
Roman Hinges contain the same internal mechanism as our popular Geneva Hinges, thus providing the same reliability and high performance. The rounded corners of the hinge plates provide a nice blend in a soft décor. Roman Hinges accommodate 5/16" (8 mm) to 1/2" (12 mm) thick tempered safety glass, and are self-centering when within 15 Degree of the closed position. Roman Hinges are constructed of solid brass, and have stainless steel plunger tips, pins, and springs to ensure long service life and reliable door closure. Roman Hinges contain the same Reversible Pivot Pin used in our Geneva Series and many other hinges. A Custom Pivot Pin (GENP1N) is also available for "off-angle" installations.
CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 Degree. If the standard 5 Degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 Degree).
Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with maximum door width of 28" (711 mm).
Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).
Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass
Construction: Solid Brass
Hinge Swings: 90 Degree in and 90 Degree Out
Closing Type: Self-Centering when within 15 Degree of closed position.
Includes: Gaskets, Screws, and Glass Fabrication Dimensions
Custom finishes are available on request. Contact Technical Sales Shower Door Department.