Easy Clean Glass Treatment TPC16A
- 0.50 KGS
- £4.99 (Fixed Shipping Cost)
Easy Clean Glass Treatment TPC16A From Shower Glass.
***BUY 2 or more and get £2.50 off each multiple***
Do you suffer with Calcium and Soap Scum build up on your shower glass screens or other glass surfaces?? You know, those horrible misty spots, dots and dirt buildup you see on the bottom of shower screens and doors!
This can be simply eradicated with our Best selling TPC16A Surface protection that is both cost effective and easy to apply to your glass.
Very similar in its nature to other Nano Glass protection systems, but with one big difference...the unmatched formula that has been created and manufactured by world leading Industry Shower specialist CR Laurence.
Established in 1966 CRL Started In Dallas and are now the largest supplier of glass consumables in the World
The Benefits of TPC16A
- Saves hours and hours of cleaning
- Dont need to buy expensive Easy Clean from the Glass processors
- An amazing finish and clean Shower Enclosure or Glass Screen
- Long Lasting surface treatment
- Plenty of application in the bottle
Questions and Answers:
WHAT IS TPC SURFACE PROTECTOR?
TPC SURFACE PROTECTOR is an ultra-thin polymer coating that is specifically formulated to be applied like a polish to make all glass, porcelain, ceramics, polished metals, laminates, and plastics remarkably water, soil, and stain repellent.
WHAT DOES TPC SURFACE PROTECTOR DO?
It seals, polishes, and protects surfaces with an absolutely invisible "non-stick" finish that allows smudges, fingerprints, dirt, grime, soap scum, rust, hard water deposits, and more…to be wiped or rinsed off easily without the use of harsh soaps, solvents, detergents, or abrasives.
HOW DOES TPC SURFACE PROTECTOR WORK?
The unique TPC SURFACE PROTECTOR polymers chemically bond to the microscopic pores of surfaces and form a non-contiguous, monomolecular coating that is chemically inert, non-flammable, and optically clear.
HOW LONG WILL TPC SURFACE PROTECTOR LAST?
As with all coatings, durability depends upon the quality of the application, the degree of exposure, and the amount of abrasion to which the surface is subjected. Unlike other coatings however, TPC SURFACE PROTECTOR is designed to be renewable, letting its sealing, polishing, and protecting properties actually rejuvenate itself to keep surfaces like new. In general, TPC SURFACE PROTECTOR will last months on sinks, tubs, showers, tile, and glass table tops, and years on windows, mirrors, picture frames, and lighting fixtures.
WILL TPC SURFACE PROTECTOR "BUILD UP", CRACK, PEEL, OR DISCOLOR?
Absolutely not! Its novel structure permits it to bond to a surface, but not to itself. Thus, it can never be over-applied, and each re-application merely fills in the voids created by surface abrasion to maintain peak water, soil, and stain repelling performance. Remarkable TPC SURFACE PROTECTOR is unaffected by sunlight, and simply cannot crack, peel or discolor like most other polishes, waxes, and glaze-type coatings.
WILL TPC SURFACE PROTECTOR CHANGE THE GLOSS OF SURFACES?
Amazingly, no! TPC SURFACE PROTECTOR restores luster and the natural gloss of glossy surfaces; it does not add gloss or change the surface of "matte" or "textured" surfaces, and brings out the beauty of whatever was there to begin with. Unlike other materials, it does not leave the surface oily, and does not attract dust and lint!
WHAT ABOUT OLD OR BADLY WORN SURFACES?
It all depends upon how badly worn or scoured the surface is. TPC SURFACE PROTECTOR cannot repair cracks, chips or scratches. Generally, on older, badly worn or damaged surfaces, TPC SURFACE PROTECTOR repellency and longevity is limited, but it will prevent the surface from getting worse. Remember, TPC SURFACE PROTECTOR was developed to keep surfaces like new; to save hours and hours of cleaning drudgery; to prevent deterioration.
WHAT HAPPENS WHEN TPC SURFACE PROTECTOR WEARS OFF?
Nothing; it just dissipates, gradually disappearing and leaving the surface the way it was before being protected.
IS IT DIFFICULT TO PREPARE THE SURFACE?
Normally, it's enough to simply wash, rinse and dry the surface before applying TPC SURFACE PROTECTOR for the first time. While many surfaces can be treated in this way without any special preparation, visibly soiled, encrusted or stained surfaces must be thoroughly cleaned before applying TPC SURFACE PROTECTOR. Re-application is even easier, just make sure the surface is dry. TPC SURFACE PROTECTOR, with its built-in polishing and penetrating properties, will do the rest.
WHAT'S THE BEST WAY TO APPLY TPC SURFACE PROTECTOR?
Just apply a small amount of TPC SURFACE PROTECTOR to a soft, padded cloth and carefully wipe it into the surface using a firm, circular and overlapping motion. Badly worn, or surfaces being treated for the first time, should be re-treated to ensure complete and uniform coverage. Then, simply wipe or polish the surface with a clean, soft cloth to remove any excess while "polishing in" luster and protection. Transparent surfaces can be sprinkled with water and wiped with a dry cloth or tissue until clear and sparkling. That's all there's to it; it will work every time. Treated surfaces look cleaner, feel cleaner, and smell cleaner!
HOW DO I KNOW WHEN IT'S TIME TO REAPPLY TPC SURFACE PROTECTOR?
That's easy. When water stops "beading", soil starts "sticking”, or stains start to "show", it's time to reapply. Just before that happens you'll notice that surfaces appear dull and seem to have lost their luster. Open up your bottle of TPC SURFACE PROTECTOR and give the surface a "once-over" to maintain peak performance.
WHAT'S THE BEST WAY TO TAKE CARE OF A SURFACE THAT'S PROTECTED BY TPC SURFACE PROTECTOR?
Usually rinsing with plain water will do the trick; at most a light soap-water or mild detergent solution to loosen stubborn dirt or "layered" soil. You'll be amazed at how TPC SURFACE PROTECTOR actually ends scraping and scrubbing, and makes cleaning a snap!
WHERE ELSE CAN I USE TPC SURFACE PROTECTOR?
On everything that's glass, porcelain or ceramic. It is also great on chrome, stainless steel and plastics - even marble, fiberglass and laminates. Let's look at a short list: Windows, sinks, tubs, showers, tile (walls, floors and counters), bathroom fixtures, lighting fixtures, glass tables, glass stove tops, mirrors, pictures, washers, dryers, refrigerators, microwaves, ovens, ranges, laminated countertops and cabinets, china-glassware-pottery - just about any hard surface that you want to keep clean and sparkling!
Some notable snippets from previous customer reviews:
- "I have been using the CRL TPC for about five years and it works better than advertised. For shower doors that get a direct hit of water every shower, you need to renew it at least once a year. For glass doors that don't get a direct hit of water, just humidity, it lasts almost forever "
- "This product is really great, better than RainX in my opinion, although similar formulation. Follow instructions for application, first time coating needs two applications. Requires some effort and elbow grease, but well worth it for long term results."
- "Very happy with this product. The water just runs off the glass. After shower the water dries, if any left, without spotting the glass. I think that it is very similar to Rain-X if have ever used this product before but I think its easier to apply. "