Vienna 380 Series Adjustable 180 Degree Glass-to-Glass Hinge -Oil Rubbed Bronze
- 0.90 KGS
- Calculated at Checkout
Catalog Number: V1E3800RB Finish: OIL RUBBED BRONZE Adjustable to Any Angle Up to 90 Degrees without Removing Door Available in Several Beautiful Finishes 3 Year Warranty Adjustable 180? Glass-to-Glass The Adjustable Vienna Series has taken our popular Vienna Hinge to a new level. Adjustment to accommodate the desired angle (up to 90 degrees) is done after the door is hung. Simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired closed position. The door can swing 90 degrees inward and 90 degrees outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degrees inside the shower area, thus having the door close snugly against the jamb. STANDARD REVERSIBLE PIVOT PIN: Each Vienna Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90?. The opposite side of the Pin is marked 85?. Standard Vienna Hinges come with the 90? side activated. Pre-Set Models come with the Pin pre-set for 85? (5? tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side. CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90?. If the standard 5? Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45?). Using two hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 110 lbs. (50 kg) with a maximum door width of 36" (914 mm). Using three hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 140 lbs. (63 kg) with a maximum door width of 36" (914 mm). SPECIFICATIONS: Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass Special Feature: Adjustable to Any Angle Up to 90 Degrees without Having to Take Door Down Construction: Solid Brass Hinge Swings: 90? In and 90? Out (at factory set position). Closing Type: Self-Centering when within 15? of closed position. Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions.