Prima #1 Pin 01 Series Top or Bottom Mount Hinge - Chrome
- 0.90 KGS
- Calculated at Checkout
Catalog Number: PPH0151CH
Number One Pivot Pin Model for Mounting at Top Left or Bottom Right of Door (Viewed from Outside) Pre-Set 5 Degree Pin for Tighter Door Closure
Available in Several Beautiful Finishes
3 Year Warranty
U.S. Patent 5297313 Prima 5 Degree Pre-Set Hinges are designed for use with 5/16" (8 mm) to 3/8" (10 mm) thick tempered safety glass. The Number One Pivot Pin Model is set so that it would be used at either the top left or bottom right of the door. The Number Two Pivot Pin Model is set so that it would be used at either the top right or bottom left of the door. When installing, you will always use one Number One Model, and one Number Two Model. They can then be positioned with the options described above. The 5 Degree Pivot Pins allow the door to close 5 Degree further into the shower enclosure. This is especially helpful in closing the door tightly against a strike jamb. These hinges may be mounted floor and ceiling, or into our Deluxe Header System. Using two hinges with 5/16" to 3/8" glass (8 to 10 mm) the hinge will hold up to 100 lbs. (45 kg) with a maximum door width of 31" (787 mm).
SPECIFICATIONS: Glass Thickness: 5/16" (8 mm) to 3/8" (10 mm) Tempered Safety Glass Special Features: Contains Pre-Set 5 Degree Pivot Pin, which allows the door to close 5 Degree further into the shower enclosure (see Ordering Tip*). Construction: Solid Brass Hinge Swings: Full Rotation Closing Type: Self-Centering when within 15 Degree of closed position. Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions This hinge series is patented (Patent Number 5297313). *ORDERING TIP: When ordering Prima 5 Degree Pre-Set Hinges, you should order one each of the Number One Pivot Pin Model, and one each of the Number Two Pivot Pin Model per door.